The US Army offers exciting and rewarding career openings for heavy construction equipment operators with relevant skills and experience. The key duties of heavy construction equipment operators in the US military are to operate various machineries such as crawler and wheeled tractors with dozer equipment attachments, scoop loader, motorized grader and towed or self propelled scraper for sale. The job requires skills to interpret information on grade stakes. In the course of their duties, these operators would clear grubs, strips, fill material with scrapers, make excavations and load different material using a Crawler Loader. They would also be expected to spread material evenly and level out ground, construct a v ditch using a grader, lift and move steel and other heavy building materials using winches, cranes, and hoists, and dig holes and trenches using power shovels. Other common tasks include the transportation of heavy material and construction equipment using tractor and trailer to provide assistance during engineering missions under combat conditions.

Heavy equipment operators in the army would also be called upon to construct berms, excavate side slopes with a crawler tractor, perform grading and finish side slopes mixing stabilizing material with soil and surface and drainage maintenance. The physical demands for the initial award of MOS (Military Occupation Specialty) are extremely high. A physical profile conforming to 222221 as per US Army standards is essential. It is also a critical criterion that the incumbent should not be colorblind.

To qualify for a job as a heavy equipment operator in the US army, a minimum score of 90 in the aptitude area, GM is expected. A valid state motor vehicle operator license is also a prerequisite. The induction provided to a new recruit in this position consists of nine weeks of Basic Training and four to twelve weeks of AIT (Advanced Individual Training) in Missouri. The training period for different construction equipment differs and the length of the initial training would depend on the equipment to be operated on the first assignment. Seven weeks of training is also provided on how to operate and perform general operator level maintenance to 5-ton dump trucks, M 915 tractor with semi trailer, dozer, grader, scraper and scoop loader. After successful completion of the course, there may be further training for operation of other equipment depending on the requirements of the duties to be assigned in the place of posting.

The Initial Entry Training or the IET is essentially intended to transform a civilian into a technically and tactically competent soldier and to inculcate in him the values of the US army. This process is a tough and comprehensive process, which requires complete dedication on the part of the trainee to completely transform in accordance with the requirements of a distinguished military career. In the initial phase of training, together with familiarizing the trainee with the goals and values of a military career, focus is also placed on the development of the individual basic combat skills and physical fitness.

The second phase of training for a heavy equipment operator is called the GUNFIGHTER phase and as the name suggests, it focuses on weaponry training. These fairly long and intensive training processes culminate in the making of a competent combatant with special skills as a heavy equipment operator.

The pay and benefits for a heavy equipment operator are as per US Army standards for soldiers. On completion of military service, there exist scores of opportunities for being employed in the civilian sector also.

Crane equipment, excavators machinery, Crawler loaders, and any other large equipment you might find on a construction site are considered construction equipment. Whilesome of you might see construction equipment as hammers, saws, andother smaller items they are in fact construction tools.

Are you lookingfor some construction equipment to help you with your next job? If soyou need to know a little bit about the equipment available.

Cranes: You can have many types of canes from the all terrain hydraulic crane, to the boom truck. A boom truck is a piece of construction equipment that has a flat bed with a crane on it rather than a smallercab for the crane with tracks. This crane system can be used to haul the material as well as move the crane about while hydraulic cranes tendto need a trailer and then roll off to be placed on the ground. These types of cranes tend to rotate 360 degrees.

Excavators: These are consider Bobcat Equipment, and backhoes of the construction equipment. The size you will need is again dependent upon the job you will have. Most construction companies have a variety for the typeof work and land they will have. Bobcats usually work out well whenyou have a little job, where as backhoes are great for digging largerholes.

Loaders: The are also many types of loaders from a front end loader to a wheel loader. Loaders are often seen used for road construction aswell as other construction jobs.

These are tractors that have a bucketon the front and use a hydraulic system to raise the bucket and dumpthe material either in a dump truck or off to the side.

Construction equipment is important whether you work on housing sitesor road construction. The equipment you choose will depend on the typeof work you do and will also be determined by the terrain you work on.

Sometimes it’s better to think twice before spending a lot of money on new heavy equipment or construction machinery. You can save an large amount of your investment funds by buying used machinery. But before you get to make such a decision you might want to think it through.

Used heavy equipment might be a solution for your business as long as you make sure the used machinery works as it should. Of course, it is used, but used machinery is typically refurbished and has technical reviews. But perhaps your personal experience is better than all that criteria. Even if the used machinery looks just fine, is a famous brand or the seller convinced you about the quality of his or her used machinery, you should get try to test it before you buy it. Always try to test the used machinery before you buy it or have someone to test the used machinery for you. Scrape, dig, lift, dump, push, whatever the vehicle has function for. Go through all the used machinery functions and they all work.

Visual inspection is another way of checking the used heavy equipment. Even if you have already made up your mind about buying used heavy machinery, you should be entitled to a good bargain. And a good bargain means you get good quality used heavy equipment for less. Take your time inspecting the used heavy equipment, and try to cover all the important areas. Used heavy equipment paint quality is not critical. However rust is an issue, so try to see if there are any rust patches or holes covered just for “cosmetic” reason. Grab a tool and try pushing or even hitting on suspected areas of the used heavy machinery to see if there is any rust falling on the ground. Slide under the used machinery and search for leaks. Test the possible leaking problem of the used machinery after you’ve been through the test drive. Also check valves and hoses before the test drive, and see after it if there are any leaks present in these places.

The testing shouldn’t stop here. Listen to the engine running for more than a minute or two. Also listen to the hydraulics when the used heavy equipment is performing its special duties. Try to detect any kind weird smells like burning oil or electrical short circuits. When you get behind the wheel or the levers, try to feel if the controls work as they should. However, you should keep in mind one thing: even the new heavy equipment may be faulty at times, which is why you should be prepared to face all problems that may arise with your used machinery, and not just assume the problem was caused by the fact that the machinery was old.

As a final advice on your shopping adventure for used heavy equipment, try to avoid buying from individuals that have no knowledge of construction equipment. Construction equipment dealers can often provide maintenance service and warranty with your used heavy equipment that can stretch from 30 to 60 days, making sure that unexpected problems will be dealt with professionally.used heavy equipment many catogories are Aggregate Equipment, International air Compressor, Komatsu equipment, caterpillar equipment, Crawler loader etc.

And, of course, don’t forget to negotiate the price of used heavy equipment. You can find a dealer that is flexible with pricing and negotiation and give you a better deal that a private owner. Good luck shopping for used machinery.